40 Pcs Pack
Length: 30cm
0.1" Female header contacts on one end, 0.1" male header contacts on other end
Standard 0.1" (2.54mm) spacing when placed next to each other
Wire Colors: brown, red, orange, yellow, green, blue, purple, grey, white, black
Gauge: 28 AWG (0.0126”)

65 Pcs
Length:
25 cm x 4 Pcs 20 cm x 4 Pcs 15 cm x 8 Pcs 10 cm x 49 Pcs
0.1" male header contacts on both ends Standard 0.1" (2.54mm) spacing when placed next to
each other
Wire Colors: brown, red, orange, yellow, green, blue, purple, grey, white, black
Gauge: 28 AWG (0.0126”)

40 Pcs Pack Length:30 cm
0.1" Female header contacts on both ends Standard 0.1" (2.54mm) spacing when placed next to
each other
Wire Colors: brown, red, orange, yellow, green, blue, purple, grey, white, black
Gauge: 28 AWG (0.0126”)

26 AWG - Suitable for Breadboard
This flexible 26AWG wire has silicone insulation with a red color and is very strong and durable. The wire is suitable for a voltage up to 600V and can be loaded with a maximum of ~ 3.5A, depending on the length.
Max Voltage: 600V Temperature: -60 ° C ~ 200 ° C
Max Current: ~ 3.5A (depending on the length)

5mm Diffused
1.8-2.2VDC forward drop Max current: 20mA
Suggested using current: 16-18mA Luminous Intensity: 150-200 mcd

5mm Diffused
1.8-2.2VDC forward drop Max current: 20mA
Suggested using current: 16-18mA Luminous Intensity: 150-200 mcd

5mm Diffused
1.8-2.2VDC forward drop Max current: 20mA
Suggested using current: 16-18mA Luminous Intensity: 150-200 mcd

5mm Diffused
1.8-2.2VDC forward drop Max current: 20mA
Suggested using current: 16-18mA Luminous Intensity: 150-200 mcd

220 Ohm Resistance 10pcs pack
1/4 Watt PTH
Thick Leads Tolerance: +/-5 ohms

1 kilo Ohm Resistance 10pcs pack
1/4 Watt PTH
Thick Leads Tolerance: +/-5 ohms

10 kilo Ohm Resistance 10pcs pack
1/4 Watt PTH
Thick Leads Tolerance: +/-5 ohms

1x Rotary Potentiometer - 50k Ohm, Logarithmic 1x Mounting Nut
1x Washer Electrical Characteristics
Taper: Linear, audio
Standard Resistance Range: 1K - 10K ohms Standard Resistance Tolerance: ±20 % Residual Resistance: 1 % max.
Environmental Characteristics Operating Temperature ...-10 °C to +50 °C Power
Rating Linear: 0.2 watt Dual Section: 0.125 watt Audio: 0.1 watt
Dual Section: 0.06 watt Maximum Operating Voltage Linear : 200 V
Audio: 150 V
Sliding Noise: 47 mV max

1N4007
Rectifier Diode
Low Forward Voltage Drop High surge Current Capability

2N2222 NPN
Collector−Emitter Voltage 40 Vdc Collector−Base Voltage 75 Vdc
Emitter−Base Voltage 6.0 Vdc Collector Current − Continuous IC 600 mAdc
Total Device Dissipation @ TA = 25°C Derate above 25°C PD 625 5.0 mW mW
/°C Total Device Dissipation @ TC = 25°C Derate above 25°C PD 1.5 12 W mW
/°C
Operating and Storage Junction Temperature Range
TJ, Tstg −55 to +150 °C

8-Bit Serial-In, Parallel-Out Shift
Wide Operating Voltage Range of 2 V to 6V High-Current 3-State
Outputs Can Drive Up To 15 LSTTL Loads Low Power Consumption, 80-µA Max ICC Typical tpd = 14 ns ±6-mA
Output Drive at 5 V
Low Input Current of 1 µA Max Shift Register Has Direct Clear

18650 8-slot Li-ion battery charger Specification:
Product Name: 18650 Charger 8 slots Input voltage: 110-240V Output voltage: DC 4.2V
Product size: 170*110*30mm Weight: 185 grams
Battery model: 18650
Features: 8 slots are independently charged and do not interfere with each other. When charging, it lights up red. When fully charged, it lights up green. Automatically stop when fully charged, not overcharged.

Frame size: 9V Block Dimensions (L x B x H mm): 26,2 x 15,2 x 48,5
Weight (g): 40.0 Electrochemical System: Nickel-Metal Hybrid
Capacity: 200mAh Nominal Voltage: 8.4V Jacket: Plastic
Int. Frame size to IEC: HR6F22

Aluminium Electrolytic Capacitor Radial Leaded
16VDC
4700uF
20% AEC-Q200

Corrugated Storage Carton Size:
Length 2' x width 1' x height 1'